Celtic Knot-Work Corner Panel
Birds with stylised neck and tail in celtic knot-work forming a corner panel.
Adapted from a a design in the Book of Kells.
Use this to frame a picture or object or incorporate into your own craft projects.
Download the .STL file to print as many as you need on your own 3d printer.
Scale the model in your slicing software to the desired size. Note:scaling too small will start to lose detail.
The images shown were printed at 9.4cm (3.7″) along the longest edge and four corner pieces would enclose a square of 13.8cm (5.43″).
The flat nature of the design is very unforgiving of an uneven build plate. It is essential to have a really level build plate, especially if printing four corners in one print.
I avoided warping and the corners lifting by stepping down my build-plate temperature. Starting at 80°C to get good adhesion for the base, then stepping down to 50°C after layer 5, 40°C after layer 10 and switching off the build plate heating completely after layer 15. Simplify3D allows you to set this up, I am not sure if all slicing software has the ability to set these step points. You may be able to control this manually from the printer’s control panel during printing.
No printer? You can find a local 3D printer and more information on how to get your file printed at 3DHubs.com
The model file is provided for your personal use and may not be shared with others, published, uploaded, posted, transmitted,
or distributed in any way, without prior permission from Celtic3d.
You are permitted to upload the file to 3d printing services for the purpose of creating prints for your own use,
but you must not make the file available for download or share it with anyone other than to facilitate printing items for delivery to you.
You are free to make any modifications you need to the file.
You are free to make as many prints from the file as you like.
There are no restrictions on use or selling printed items produced from these files.
There are no reviews yet.